|
|
GY521
Aug 20, 2016 13:38:53 GMT -7
Post by Max on Aug 20, 2016 13:38:53 GMT -7
|
|
nad
New Member
Posts: 13 
|
GY521
Aug 21, 2016 0:38:54 GMT -7
Post by nad on Aug 21, 2016 0:38:54 GMT -7
Thanks! But i gave "Dobot is not connected!" error message from download util. If i will use XLoader, can be?
i install on here "open-dobot/legacy/firmware_ramps_arduino_ino" to arduino before flashing. Did I have to do another?
|
|
|
|
GY521
Aug 21, 2016 8:38:29 GMT -7
Post by Max on Aug 21, 2016 8:38:29 GMT -7
Legacy is legacy. If you can't flash firmware then there might something has happened to your arduino.
|
|
nad
New Member
Posts: 13
|
GY521
Aug 21, 2016 8:47:17 GMT -7
Post by nad on Aug 21, 2016 8:47:17 GMT -7
I flashed with XLoader and calibration is working at now. But why dobot tools can't connect to my arduino?
|
|
|
|
GY521
Aug 22, 2016 20:40:22 GMT -7
Post by Max on Aug 22, 2016 20:40:22 GMT -7
|
|
nery
New Member
Posts: 4
|
GY521
Nov 29, 2017 9:26:42 GMT -7
Post by nery on Nov 29, 2017 9:26:42 GMT -7
Hey im new here. I would like to know the GY521 correct position, i can't acces the link in the first post
|
|
nery
New Member
Posts: 4
|
GY521
Dec 4, 2017 2:53:18 GMT -7
Post by nery on Dec 4, 2017 2:53:18 GMT -7
I am not using dobot, its for another robot with 3 rotational joints similar to dobot but I dont know the original accelerometer position refered
|
|
